TANK FUEL DC CUBE 56 Homologation Ministry of the Interior n ° 3704 / 1671-37 / 122
Vertical tanks TANK-FUEL DC model CUBE 56, approved by the Ministry of the Interior according to the Ministerial Decree of 22 November 2017. They are double-chamber vertical tanks, space-saving, equipped with dispensing systems. The internal chamber acts like a diesel oil deposit, while the watertight external chamber (safety tank), with continuous monitoring, guarantees the recovery of any product leaks and/or spills, by the provisions of Ministerial Decree 11/22/2017 for fire prevention purposes.
The tanks are made of S235JR carbon steel according to the UNI EN 10025-2 standard, 3mm thick, and treated externally with a metallic gray paint cycle. They are equipped with 1 “internal suction pipe with non-return valve with calibrated spring, suction filter, 1” ball valve, 400 manhole type diesel fuel with 3 “load with quick brass bayonet coupling with a load-limiting valve at 90%, enclosed in an anti-spill chamber with hinged pad-lockable lid, 1 ″ 1/2 vent with brass flame cap, mechanical level indicator with float, connection for earth cable connection, ball valve for emptying cavity, with operating lever with key safety lock, access ladder to the manhole with non-slip steps in accordance with safety standards and containment tray for any leaks from the dispensing unit.

Complete with electronic leak detection control unit for CONTINUOUS MONITORING OF THE INTERCAP as required by Ministerial Decree 22/11/2017 (MANDATORY device approved UNI EN 13160-1: 2016)
TANK FUEL DC diesel tank approved with CUBE 56 delivery system

The TANK-FUEL CUBE 56 is equipped with an electronic panel with an emergency stop and control chip for level probe (pump block at minimum level).
Capacity in liters: | 995 | 1,600 | 2,000 | 3,000 | 4,000 | 5,000 | 6,000 | 7,000 | 8,000 | 9,000 |
All TANK-FUEL DC can be equipped with a water separator filter on the delivery.
Each TANK FUEL DC approved diesel tank is accompanied by the following documentation:
– CE user and maintenance manual;
– declaration of conformity;
– copy of homologation certificate;
– metric table.

Warranty: 2 years