External dispensing tanks, double-walled on non-rolling support saddles, designed and built by the UNI EN 12285-2 standard, made with convex bottoms and carbon steel sheet of S235JR UNI EN 10025 quality, assembled using a certified submerged arc welding process.
They are treated after construction with a RAL 9006 gray painting cycle.
They represent the ideal solution for the supply and storage of diesel fuel above ground in total safety and maximum environmental protection.
All tanks are subjected to a tightness test at a pressure of 1.5 bar for the internal chamber and 0.5 bar for the interspace.
Each tank is equipped with:
– 620mm diameter manhole, complete with gasket and zinc-plated bolts.
– 3 “filling connection with brass bayonet quick opening cap.
– 3″ load limiting valve.
– Vent with brass flame arrestor terminal.
– Indicator mechanical level with float for capacities up to a diameter of 2,000mm.
– Metric rod for level control for capacities with a diameter greater than 2,100mm.
– Service ladder with non-slip and non-slip rungs.
– Suction line is complete with a foot valve and filter.
– Vacuum lifting eyebolts.
– Anti-rolling support saddles are welded to the plating on a reinforcement plate.
– Continuous monitoring unit for any leaks with an alarm signal.
DISPENSING GROUP IN CABINET P56
P56 Dispensing station, with self-priming volumetric electric pump with Panther 56 model filter (nominal flow rate 56 l / min), with single-phase 220V power supply, complete with 3-digit volumetric meter, oscillating disc with aluminum body, 4m delivery hose, and gun automatic with a swivel fitting. Also equipped with an electrical control panel and minimum level probe.
DISPENSING GROUP IN CABINET P72
P72 Dispensing station, with self-priming volumetric electric pump with Panther 72 model filter (nominal flow rate 72 l / min), with single-phase 220V power supply, complete with 3-digit volumetric meter, oscillating disc with aluminum body, 4m delivery hose, and gun automatic with a swivel fitting. Also equipped with an electrical control panel and minimum level probe.
Optional for all versions in the locker:
– impurity filter;
– water separator filter;
– internal LED lighting
The tanks can also be equipped with electronic columns and alternative dispensing systems, for the management of corporate fleets, model CUBE 70MC or SELF-SERVICE MC.
CERTIFICATIONS:
– Certificate of production and testing of the tank and dispensing group by the UNI EN 12285-2 standard;
– CE certificate of conformity of the dispensing group;
– User and maintenance manual;
– Metric centimeter table for level measurement.
– – THIS PRODUCT CURRENTLY CANNOT BE USED IN ITALY – –